|
|||
|
|
|
|
|
Search:
 |
Name：Railway power solution
Train station
What will happen if power is gone in a railway station?
The fire fighting system, guidance system, safety system, telecom system, signals system and data system will collapse; the whole station will get in a mess and horror; tremendous economic loss will be caused.
Turbo’s power solution provides the guarantee to the train station. We configure the ATS and auto control system to realize the low noise, stable performance, to guarantee the train station operating normally.
Details
Requirements and Challenges
1、Low noise
The power supply should be super low without any disturbing of the workers, and also the passengers can enjoy a quiet environment
2、Main and necessarily protective equipments
The gensets will automatically stop and give signals in the following cases: low oil pressure, high temperature, over speed, start failure.
The gensets are configured with ATS to realize auto start.
When the main fails, the gensets will auto start in 5s ( adjustable). Three times consecutive start is available. It takes less than 10s to the switch between the main load and gensets load, less than 12s to the satisfy the load operation condition.
when the mains power gets back, the gensets will auto stop after 1-300s(adjustable) running and cooling.
3、Stable performance & high reliability
Average failure interval: not less than 3000 hours
The pure sinusoid design, steady output voltage and frequency, high loading capacity under nonlinear condition
Effective shock absorption facility, ensure the system’s steady performance.
Power Solution
Superb power generators, with low noise design, configured with auto control system, connected ATS to ensure the standby power could supply immediately once the main fails. The power supply is stable, low noise and optimized exhausting, which is compliant with the Germany TA-Luft Standard，the U.S. California Air Resources Board( CARB) standard, U.S. Environmental Protection Agency(EPA) standard and European off-highway emission standard.
The automatic control and ATS could satisfy the train station’s special requirements. The machine can be connected with computer(friendly interface, operation software in both Chinese and English) with RS232 or RS485/422 connector to realize remote control, remote signaling and telemetering automatically at unattended operation
Advantages
Adopt standard design, the spare parts are compatible, convenient for maintenance.
Whole set product and turn-key solution help customer use and maintain the machine easily without much technical knowledge.
The control system could realize auto switch, auto start, auto stop and alarming.
Save cost and well environment protection, low consumption, superb emission index, low noise (under 70db at 1.0m distance)
Compact size, some special options are provided to meet demand in the cold, tropical area.
For bulk order, custom design and development is provided.
|
Address: Floor 29th, Sinopec Building
No.7001 North Ring Road, Futian District, Shenzhen, China Tel: 86-755-82776086 Fax: 86-755-82776090
COPYRIGHT ©2011 Turbo Energy Technology Co,.Ltd · Power by Qsyes
|